 |
Mayfield Electric & Water Systems |
|
|
|
Internet InstallationYour Navini modem is a user-friendly, easy-to-install device that helps you connect wirelessly to the Internet. Get information below on how to set up your modem. Modem Installation (No Outside Antenna)1. Turn OFF the computer and the Modem before installation. Connect the Ethernet cable to the Modem and to the corresponding port on the PC.
2. Connect the AC power adapter to the Modem and to a 110/220 VAC, 50/60 Hz outlet.
Caution: Use only the certified 6.0 VDC output power adaptor supplied with this equipment (UL listed for USA). Use of any other power adapter can damage the Modem. 3. Rotate the Modem’s antenna clockwise to the UP position.
4. Push the On/Off button on the Modem to turn the unit ON.
5. Turn the computer ON. When the system is up, log into the computer. 6. Now that your Modem is installed and both the Modem and computer are powered on, you should be able to access the Internet. To access the Internet, open the web browser that is installed on your computer. NOTE: If you are experiencing difficulties with your Internet connection after installation, please review the installation procedures and ensure that all steps were completed properly. If you still can not access the Internet click here for Internet Troubleshooting Instructions. For More Information Contact: |
|
Send mail to jcre@mayfieldews.com
with questions or comments about this web site.
|
